20
CC 100 M100EN1
EVERY 500 HOURS OF OPERATION (Every 3 months)
Fig. 31 Hydraulic fluid filter
3. Cover
4. Filter cartridge
5. Grip
6. Filter holder
1
2
6
3
4
5. Loosen the filter cartridge (4) from the grip (5) and
discard the cartridge.
6. Fit a new cartridge to the grip and insert the unit into
the filter holder (6). Refit the red cover.
7. Start the engine and allow it to run at full revs for
half a minute and ensure that the filter cover (3)
does not leak.
Ensure that ventilation is adequate
(extractor) when running the engine
indoors. (Hazardous carbon dioxide
fumes).
Fig. 30 Hydraulic fluid filter
3. Cover
Fig. 29 Engine compartment
1. Mounting screws
2. Safety plate
3
5
Hydraulic fluid filter - Change
3. Loosen the red cover (3) and pull up the filter
cartridge (4).
4. Refit the red cap temporarily to prevent dust and dirt
from entering the reservoir.
1. Loosen the six mounting screws (1).
2. Remove the protective plate (2).
Summary of Contents for CC100
Page 2: ......
