Dynapac CC 622, Maintenance Manual

Page: 39 / 39

37 CC 622/622HF M622EN3
1
2
3
4
5
6
7
8
9
10
11
12
ELECTRICAL SYSTEM, FUSES
Fuses on the machine
The figure shows the rating and function of the different
fuses. All fuses are flat pin fuses.
Fig. 59 Fuse boxes, left side
1. Vacant
10A 2. Direction indicators, main fuse
7,5A 3. Left position lights, front and
rear, brake lights
5A 4. Right position lights, front and rear
5A 5. Left direction indicator, front and
rear, side blinkers
5A 6. Right direction indicator, front and
rear, side blinkers
*/20A 7. Right working lights
*/20A 8. Left working lights
7,5 A 9. Left front headlight,
instrument lighting
7,5A 10. Right front headlight
7,5A 11. Edge cutter, sprinkler Up/Down
12. Vacant
*/If driving lights 10A
Fuse boxes, right side
7,5A 1. Brake valve, start relay, control relay cab
10A 2. Vibration relay, VBS
3A 3. Indicator panel
7,5 A 4. Horn
7,5A 5. Vibration Front/Both/Rear, AVC-relay
10A 6. Hazard beacon
7,5A 7. Sprinkler pump front
7,5A 8. Sprinkler pump rear
15,0A 9. Sprinkler system main fuse
15,0A 10. Steering, offset up/down
7,5A 11. Reversing alarm
7,5A 12. Instruments, voltmeter, temperature level,
speedometer, tachometer, frequency meter
Fuses in the cab
1 2 3 4 5 6
Fig. 60 Fuse box in cab
15A 1. Rear cab working light
15A 2. Front cab working light, drum
headlight
5A 3. Cab interior lighting
20 A 4. Heating/fresh-air fan
15A 5. Windshield wiper/washer
15A 6. Front windshield wiper/washer
The electrical system in the cab has an individual fus
box located in the right front side of the cab roof. The
figure shows the rating and function of the diffrent
fuses. All fuses are flat pin fuses.