17
CC 622/622HF M622EN3
EVERY 50 HOURS OF OPERATION (Weekly)
Pump drive, oil level
– Checking/Topping up
Position the roller on a flat surface.
When checking the oil level, the engine must
be switched OFF and the parking brake
applied.
Open the right door of the engine compartment and
screw off the dipstick (1).
The oil level must be between the two marks at the
bottom of the dipstick.
Fill with transmission oil if required; see lubricant
specification.
Ensure that the rubber packing between the dipstick
and gear housing is in place, and firmly screw in the
dipstick.
Fig. 20 Pump gearing
1. Dipstick
1
Summary of Contents for CC 622
Page 2: ...19 ILF015WO1...
