Dynapac CC 622, Maintenance Manual

Page: 10 / 39

8
CC 622/622HF M622EN3
MAINTENANCE MESURES
Item in Measure See page Comments
fig. 1
Before starting each day
2 Check level of engine oil 10 See engine manual
22 Check level of engine coolant 10
13 Check level in hydraulic reservoir 11
3 Refuel 11
5 Fill the water tanks 11
6 Check the watering system/drum 12
6 Emergency watering 13
7 Check setting of scrapers/drum 13
Inspect spring-action scrapers 13
Check brakes 14
Every 10 hours of operation (Daily)
Item in Measure See page Comments
fig. 1
10 Lubricate the steering articulation 15
11 Lubricate steering cylinder mounts 15
18 Lubricate control cylinder for pivot steering 15 Optional
1 Inspect and if necessary clean the filter
element in the air cleaner
16 Replace as required
23 Check oil level in pump gearing 17
Inspect the air conditioning 18 Optional
IMPORTANT ! After the first 50 hours of operation with the roller change
all the oil filters and lubricating oil, but not the hydraulic fluid.
Every 50 hours of operation (Weekly)
The periodic measures should be performed primarily
after the specified hours of operation. Use the daily,
weekly, etc. time periods only where this is not possible.
Remove all dirt before filling, when checking
oils and fuel, and when lubricating with oil or
grease.
The engine manual specifies additional ser-
vice/maintenance instructions which relate to
the diesel engine.