Dynapac CC 622, Maintenance Manual

Page: 23 / 39

21 CC 622/622HF M622EN3
Engine
– Changing the oil
Fig. 27 Engine compartment, left side
1. Oil drain
2. Radiator
Place the roller on a level surface. Switch
the engine off and push in the reserve/
parkingbrake knob for all checking and
adjustments on the roller, unless otherwise
specified.
The engine oil drain plug is located adjacent to the
battery behind the left door of the engine compartment.
Run the engine warm before draining the oil.
Ensure that ventilation (evacuation) is
adequate if the engine is run indoors.
(Risk of carbon monoxide poisoning).
Place a suitable receptacle, for at least 15 litres (4 gal),
under the drain plug.
Observe caution when draining the engine
oil. Wear gloves and safety goggles.
Unscrew the oil drain plug (1). Allow all of the oil to
drain off, and refit the plug.
Fill with fresh engine oil; see lubricant specification or
the engine manual for the correct grade of oil.
Check the dipstick to ensure that the engine oil level is
correct, for details see the engine manual.
2 1
The oil filter (1) can be reached most easily through the
right-hand door of the engine compartment.
See the engine manual for details concerning changing
of the filter.
Engine
– Changing the oil filter
Fig. 28 Engine compartment, right side
1. Oil filter
1
EVERY 500 HOURS OF OPERATION (Every three months)