22
CC 622/622HF M622EN3
EVERY 500 HOURS OF OPERATION (Every three months)
Drum, oil level
– Inspection/Filling
Fig. 29 Drum, vibration side
1. Filler plug
2. Level plug
1
2
Position the roller with the filler plug (1) - the large plug -
straight up.
Wipe clean around the level plug (2) - the small plug -
and unscrew it.
Make sure that the oil level reaches up to the lower
edge of the hole, top off with fresh oil as required. See
Lubricant specification.
When removing the filler plug, wipe it clean from any
metal on its magnet.
Make sure that plug seals are intact and replace with
new seals as required.
Refit the plugs.
Check both drums.
Drive a distance and make sure that the plugs are tight.
Summary of Contents for CC 622
Page 2: ...19 ILF015WO1...
