35
CA 262/362/512 M262EN2
Upon delivery from the factory, the various systems
and components are filled with the oils specified see
lubricant specification and they can be used at ambient
temperatures from -10°C to +40°C (14°F - 104°F).
A maximum temperature of +35°C (95°F)
applies for biological hydraulic fluid.
When operating in hotter ambient temperatures, but up
to max. +50°C (122°F), the following instructions apply:
The diesel engine can handle this temperature with the
standard oil, but the following oils must be used in the
other components:
Hydraulic system with mineral fluid: Shell Tellus TX100
or corresponding.
Other components using transmission oil:
Shell Spirax HD 85W/140 or corresponding.
The temperature limits apply for a roller with standard
features.
Rollers with extra equipment such as noise suppress-
ers etc. may require additional attention at the upper
temperatures.
When washing the machine, do not direct the
jet of water directly at the fuel or hydraulic fluid
tank covers. This is particularly important
when using a high-pressure washing unit.
Do not spray water directly on electric components or
the instrument panel. Put a plastic bag over the filler
cap of the fuel tank and secure with a rubber band.
This will prevent water from entering the venting hole in
the filler cap. This could otherwise cause operational
disturbance, for example, a clogged filter.
If there is a fire in or on the machine, it is best to use an
ABE-class fire extinguisher. However, a BE-class CO2
extinguisher is also suitable.
If the roller is equipped with a protective structure
(ROPS, Roll Over Protective Structure), or protective
cab, never subject the structure or cab to welding or
drilling. Never attempt to repair a damaged structure or
cab; they must be replaced with new ones.
When an auxiliary starter battery is used, always
connect the positive terminal on the auxiliary battery to
the positive terminal on the roller’s battery, and
negative to negative.
SPECIAL INSTRUCTIONS
Standard lubricants and other
recommended oils
Higher ambient temperature
max. +50°C (122°F)
Temperatures
High-pressure washing
Extinguishing fires
ROPS, protective cab
Starting assistance
Summary of Contents for CA 262 Series
Page 2: ...19 ILF015WO1 ...
