![Dynamix ANEXX A User Manual Download Page 59](http://html1.mh-extra.com/html/dynamix/anexx-a/anexx-a_user-manual_2548390059.webp)
4 Ports 11g Wireless ADSL2/2+ Router
52
4.3.1.1.5 New Connection - Bridge Connection Setup
Bridge:
When Bridge mode is selected, the following screen will pop-up. A Bridged connection basically
disables the routing, firewall and NAT features of the 4 Ports 11g Wireless ADSL2/2+ Router. In a Bridged
connection, the 4 Ports 11g Wireless ADSL2/2+ Router acts as a modem or hub, and just transmits packets
between the WAN interface and the LAN interface. A Bridged connection assumes that another device is
providing the routing functionality that is now disabled in the 4 Ports 11g Wireless ADSL2/2+ Router.
Name:
Enter the Bridge connection name. The name must be unique and must not contain spaces
and must not begin with a number.
Type:
Connection Type :
Bridge
.
Sharing:
Select
“Disable”
,
“Enable”
or
“VLAN”
sharing. Default setting is
“Disable”
. The VLAN
needs to be selected to create VLAN.
Options:
Click to enable
“NAT”
and/or
“Firewall”
functionality. Default is
“Enable”
.
VLAN ID:
If
“VLAN”
is selected, manually enter the
“VLAN ID”
and select
“Priority Bits”
from
the drop down manual.
Priority Bits:
Priority is given to a VLAN connection from 0-7, 0 being the highest priority.
Bridge Settings:
;
Encapsulation:
Select the encapsulation type (LLC or VC) according to the information
provided by the ISP.
;
Select LAN:
Up to three LAN Group can be specified. Select your LAN Group from the drop
down manual.