![Dynamix ANEXX A User Manual Download Page 169](http://html1.mh-extra.com/html/dynamix/anexx-a/anexx-a_user-manual_2548390169.webp)
4 Ports 11g Wireless ADSL2/2+ Router
162
7.
What is ISM band?
Ans.
The FCC and their counterparts outside of the U.S. have set aside bandwidth for unlicensed use in the
ISM (Industrial, Scientific and Medical) band. Spectrum in the vicinity of 2.4 GHz, in particular, is being
made available worldwide. This presents a truly revolutionary opportunity to place convenient
high-speed wireless capabilities in the hands of users around the globe.
8.
What is MAC Address?
Ans.
Short for
Me
dia
A
ccess
C
ontrol
Address.
It is a hardware address that uniquely identifies each node of
a Ethernet networking device. This address is usually permanent.
9.
What is IEEE 802.11b standard?
Ans.
IEEE 802.11b is an extension standards to 802.11 that applies to Wireless LAN and provides 11Mbps
transmission speed in the 2.4 GHz band.
10.
What is IEEE 802.11g standard?
Ans.
IEEE 802.11g is an extension standards to 802.11 that applies to Wireless LAN and provides 54Mbps
transmission speed in the 2.4 GHz band.
11.
What
is NAT ( Network Address Translation ) and what is it used for?
Ans.
NAT translates multiple IP Address on the private LAN to one public IP Address (in WAN) that is sent
out to the Internet. NAT adds a level security since the IP address of a PC connected to the private LAN
is never transmitted on the Internet.
12.
What
can I do when I am not able to get the web configuration screen for this 4 Ports 11g Wireless
ADSL2/2+ Router?
Ans.
Remove the proxy settings on your Internet Browsers or remove the dial-up settings on your
browser.
13.
What
is DMZ ( DeMilitarized zone )?
Ans.
DMZ allows one IP Address (computer) to be exposed to the Internet. Some applications require
multiple TCP/IP ports to be open. It is recommended that you set your computer with a static IP if you
want to use DMZ features.
14.
What is BSS ID?
Ans.
A specific Ad-Hoc LAN is called a Basic Service Set (BSS). Computers in a BSS must be configured
with the same BSS ID.