4 Ports 11g Wireless ADSL2/2+ Router
145
4.6.6 TOOLS - Modem Test
The
Modem Test
is used to check weather your Modem is properly connected to the WAN network. This test
may take a few seconds to complete. Before running this test, make sure you have at least one WAN
connection configured and have valid ADSL link; if the ADSL link is not connected, the test will fail. Figure
below
illustrates the Modem Test screen with one WAN connections (Hinet) pre-configured.
Connection:
The WAN connections you have available.
Note:
You will not be able to perform a modem test without any WAN connection configured.
Type:
The type of the WAN connection.
VPI/VCI:
Virtual Path identifier/Virtual Channel Identifier.
Test Type:
There are 4 test types:
;
F4 End:
F4 end to end.
;
F4 Seg:
F4 segment.
;
F5 End:
F5 end to end.
;
F5 Seg:
F5 segment.
