3-26
Post-run processing function is outlined below:
1) <Zoom> RE-scale either or both axes
2) <Peak> Lists the value of the peaks of a spectrum.
3) <Valley> Lists the value of the valleys of a spectrum
4) <All Data> Lists all data of wavelength scan.
5) <Smooth> Smoothing of a spectrum.
6) <Derivate> Displays the 1
st
derivative spectrum.
7) <Data Reset> Goes back to the graph display based on the original
data.
Rescaling a Spectrum
The axes of a selected spectrum can be re-scaled by using the following
procedure:
Press 1 on the keyboard. The ZOOM interface is displayed as below:
Reenter the <START WL> and <STOP WL> to modify the X-axes
value.
Reenter the <Upper Limit> and <Lower Limit> to modify the Y-axes
value.
Press 0 to end setting the parameters and the new spectrum is
rescaled.
nm
-0.001
A
Zoom
1
Start WL (nm)
900
2
Stop WL (nm)
800
3
Upper Limit
3.000 ABS
4
Lower Limit
-3.000 ABS
0
End Setting
Select Function:_
Sel:_
500.0