Dynamica HALO RB-10, Instruction Manual, Page: 46 / 86

3-13
The definition of the <DIFF> and <Ratio> is:
If the <WL> number is 2, the <DIFF> value and <RATIO> value are calculated
from the following formula.
DIFF = WL1 – WL2
RATIO = WL1/WL2
If the <WL> number is 3, the <DIFF> value and <RATIO> value are calculated
from the following formula.
DIFF = WL1- WL2
RATIO = (WL1-WL3)/(WL2-WL3)
To measure a second sample, press
Start/Stop
again.
Press 1 to print the data. An example of the result is shown on the following
page.
One set of data is displayed on the screen, for multiple sample measurement.
Press the
▲
ARROW or
▼
ARROW to browse the data. <ID> on the left corner for the
sample set indicates the sample set.
Once
Start/Stop
is pressed, the latest set of measured data will be displayed
on the screen.
NOTE: 1. Press Autozero 100%T to autozero the sample again.
2. Press Clear Return to return to the previous menu.
3. Press Main Menu to back to the main menu.
nm 0.001 A
ID WL1 WL2 WL3 Diff Ratio
1 0.001 -0.001 -0.002 0.002 1.500
2 0.001 -0.001 -0.002 0.002 1.500
3 0.001 -0.001 -0.002 0.002 1.500
Press START Measure
1 Print
500.0