1-3
c) Avoid installation in near heat generating apparatus such as a gas
burner, electric heater or oven in order to prevent the mainframe
cover being heated beyond 70 Deg C.
d) Avoid installation near instruments which generate a strong
electric field (such as an electric welding machine, high frequency
furnace or pole transformer).
e) Avoid a dusty environment (otherwise optical performance might
deteriorate).
f) The line voltage must be stable and free from a rapid fluctuation
(otherwise noise might increase).
g) Do not frequently turn on and off electric instruments (stirrer,
vibrator, etc) which are connected to the same power line as the
HALO RB-10 but are not fitted with noise suppressors.
1.3 Check of Contents
After unpacking, check the contents of delivery against the packing list.
In the HALO RB-10, you should find the following items.
a. HALO RB-10 Main unit
b. Operating Manual
c. Power cord with fuse
d. 4 cell holder for HALO RB-10
e. Dust cover
f. One Philips and one flat blades screw driver
If any part is missing or damaged, or if you have a question, contact the nearest
Dynamica sales representative.
Note:
The optical system is very delicate.
In addition, the control unit incorporates high-density electronic circuit
components which function as a computer.
The above cautions should be strictly observed.