Dynamica HALO RB-10, Instruction Manual, Page: 58 / 86

3-25
Press
Start/Stop
on the keyboard to begin a sample scan after the baseline
correction is completed.
Press
Start/Stop
key again to interrupt the scan in progress.
Note: The prompt Baseline again will appear on the screen. If the scan
parameters are identical, it is not necessary to perform Baseline
correction again.
3.4.6 Post-Run Processing
Press 1 on the keyboard to display the processing interface.
500.0 nm -0.001 A
190 1100
Select Function:_
1 Process 2 Baseline 3 Print
nm -0.001 A
Process
1 Zoom
2 Peak
3 Valley
4 All Data
5 Smooth
6 Derivate
7 Data Reset
Select Function
Sel:_
500.0