3-17
Place your first standard sample in the cell holder, close the sample
compartment and then press Start/Stop .
Replace with the next standard sample and then press Start/Stop again.
After all standards are measured, a sub menu will appear on the screen as
shown below.
Press 1 and a graph will be displayed on the screen as below. There are three
prompts under the line. <Process> , <Measure> and <Print>.
nm
0.001
A
Place Standard and Press START
500.0
STD TEST
nm
0.001
A
ID
ABS
1
0.001
2
0.002
3
0.003
1
Graph
500.0
STD TEST