TOUR PROGRAMMING
The
'
Tour
'
means an auto-touring sequence.
Before programming the group, it must be programmed
groups.
The tour program allows set up to maximum 6 -group and
72 presets.
The following steps are the settings:
Press
key and press
key on the
keyboard.
It appears the menu message on LCD of keyboard at
the same time a message
"
Set Tour1
"
on the
monitor.
Enter numeric key for group from No
to No
for tour and press
key.
Set group number on
'
Group No? 1 - 6
'
and press
key.
After entering group number and pressing
key,
it appears a message again,
'
Group No? 1 -
6
'
sequentially up to full setting.
Finally, press
key on the keyboard.
How to run and stop programmed group:
RUN: Press
key on the keyboard to run the
tour.
STOP: Press
key again or touch the joystick to
stop the group.
11. TOUR PROGRAMMING
SPIRAL SEQ PROGRAMMING
This function allows make spiral surveillance in a way that
the camera moves from upper, rotate and slow down
sequentially.
How to run and stop programmed group:
RUN - Enter
and press
,
key on the
keyboard
+ +
STOP: Enter
and press
,
key or
touch the joystick to stop the group.
+ +
12. SPIRAL SEQ PROGRAMMING
<View on the keyboard>
- SET TOUR -
Group No? 1 - 6
Camera : 000
Input?
[MAIN]
- SET TOUR -
Group No? 1 - 6
Camera : 000
Input? [MAIN]
<View on the monitor>
CAM-001
Set Tour1
CAM-001
Tour1
<View on the monitor>
CAM-001
Spiral SEQ