GROUP PROGRAMMING
Superior Speed Dome system appears error messages in
The
'
Group
'
means a group-touring sequence.
Before programming the group, it must be programmed presets.
The one group program allows set up to maximum 12 presets.
The following steps are the settings:
Press
key and press
key on the keyboard.
It appears the menu message on LCD of keyboard at
the same time a message
"
Set GRP1
"
on the monitor.
Enter numeric <1> key for group as desire from No
(1) to No (6) and press
key on the keypad.
Set preset number on
'
Preset No? 1 - 128?
'
and
press key.
Set group sequence speed to nest preset on
'
Move
Speed? 1 - 127 sec
'
. 1 sec is highest speed and
press key.
Set Dwell Time to next preset on
'
Dwell Time? 1 -
127
'
and press
key. It is the shortest in 1 sec
and the longest in 127 sec.
Set next preset number on
'
Preset No? 1 - 128
'
and
press key.
Repeat again the above settings sequence as desire.
Finally, press
key on the keyboard.
How to run and stop programmed group:
RUN: Enter numeric
~
, and press
key on the keyboard to run the group as you want.
-
+ -
+ -
+
-
+ - + - +
STOP: Press
key again or touch the joystick to
stop the group.
10. GROUP PROGRAMMING
SWING PROGRAMMING
Before programming the swing, it must be programmed
presets.
PAN or TILT SWING
The following steps are the settings:
Press
key and press
key on the keyboard.
It appears the menu message on LCD of keyboard.
Enter numeric
key for pan swing or enter
numeric
key for tilt swing.
EX) enter
+ press
key.
Set swing start preset number on
'
Swing Start No?
'
and press
key.
Set swing end preset number on
'
Swing End No?
'
and press
key.
Set swing dwell time on
'
Swing Time?
'
and press
key.
Set swing speed on
'
Swing Speed?
'
and press
key.
Finally, press
key on the keyboard.
If you want to stop the swing, press
key or touch the
joystick.
During the swing programming, it appears a message to be
done the set on the monitor as
'
SAVE Swing
'
.
When the swing runs, it appears a message on the monitor
as
'
Swing
'
.
How to run and stop programmed swing:
RUN: Press
key on the keyboard to run the swing.
STOP: Press
key again or touch the joystick to
stop the swing.
9. SWING PROGRAMMING
<View on the keyboard>
-SET SWING-
Sw Mode : 1 = Pan, 2 = Tilt
Camera : 000
Input?
[MAIN]
-SET SWING-
Swing Start No?
Camera : 000
Input?
[MAIN]
-SET SWING-
Swing End No?
Camera : 000
Input?
[MAIN]
-SET SWING-
Swing Time? 1 - 127 sec
Camera : 000
Input?
[MAIN]
-SET SWING-
Swing Speed? 1 - 64 / sec
Camera : 000
Input?
[MAIN]
<View on the monitor>
CAM-001
SAVE Swing
CAM-001
Swing
NOTE: It allows the Group-tour to memory the preset
up to 72 positions, even though this camera
enables to program up to 128 preset positions.
<View on the monitor>
CAM-001
Set GRP1-01
CAM-001
GRP1-01
<View on the keyboard>
-SET GROUP-
Group No? 1- 6
Camera : 000
Input?
[MAIN]
-SET GROUP-
Preset No? 1 - 128
Camera : 000
Input?
[MAIN]
-SET GROUP-
Move Speed? 1 - 127 sec
Camera : 000
Input?
[MAIN]
-SET GROUP-
Dwell Time? 1 - 127 sec
Camera : 000
Input?
[MAIN]
-SET GROUP-
Preset No? 1 - 128
Camera : 000
Input?
[MAIN]