Using the keyboard, it can be opened the OSD menu on
the monitor. Enter number
and press
key on
the monitor.
N key
1. ID SET
ID Set allows you to program how labels are displayed on
the monitor for identification of camera.
To set a label of ID: It allows set 16 characters.
Use the joystick to position the cursor beside a label.
Use the joystick to turn the label up, down or press
/
key
If you move the joystick up or down, move to other
menu item.
2. ID DISPLAY
ID Display allows the programmed set camera ID label to
display on the monitor or not as desire.
There are two ID display settings:
ON (default) - If ID Display mode is set to ON, the
camera ID label will be displayed on the monitor.
OFF - Camera ID label is not displayed.
To set the ID Display mode:
Use the joystick to move left/right.
The parameter of menu is changed to: ON, OFF
After select one of parameter, move to joystick up or
down.
3. BACK LIGHT
Backlight is a back light compensation (BLC). If a bright
backlight is present, the objects in the picture may appear
dark or as a silhouette.
Back light compensation enhances objects in the center of
the picture. The dome uses the center of the picture to
7. DOME SETTING
The system information screen displays dome drive model,
software version, and other diagnostic information.
System settings cannot be changed using this screen. This
screen is for reference only.
Use the following steps to display the system information
LCD screen on the keyboard:
Use the keyboard.
Enter the related camera number and press
key e.g.
+
Enter
number and
press key.
The system information appears on the monitor.
It appears the information for approx. 5 seconds.
6. HOW TO PROGRAM YOUR DOME SYSTEM
<View on the monitor>
<< CAMERA SETUP p1 >>
1. ID Set :
CAM-001
2. ID Display : ON
3. Back Light : OFF
4. Shutter speed : AUTO
5. BLC level : 052
6. White balance : AUTO
7. Focus mode : AUTO
8. Zoom MAX Limit : x46
- NEXT MENU PAGE
<< CAMERA SETUP p1 >>
1. ID Set :
CAM-001
2. ID Display : ON
3. Back Light : OFF
4. Shutter speed : AUTO
5. BLC level : 052
6. White balance : AUTO
7. Focus mode : AUTO
8. Zoom MAX Limit : x46
- NEXT MENU PAGE
<< CAMERA SETUP p1 >>
1. ID Set :
CAM-001
2. ID Display : ON
3. Back Light : OFF
4. Shutter speed : AUTO
5. BLC level : 052
6. White balance : AUTO
7. Focus mode : AUTO
8. Zoom MAX Limit : x46
- NEXT MENU PAGE
SPEED DOME CAMERA
Ver. XXXX
- CAMERA Module: xx
- Protocol : XXXX
< COMM : 9600, N, 8, 1 >
- Input Power: xx [v]