The masking zone programming window appears on
the monitor.
Use the joystick to position this masking zone window
as you desire.
There are two zone window size settings:
key - Adjust the size of window is to be large
(As same to way, turn the joystick to
counterclockwise).
key - Adjust the size of window is to be small
(As same to way, turn the joystick to clockwise)
If the setting is done, press
button on the keyboard.
The previous menu appears on the monitor.
CH1 is changed to OFF (The zone is ready to
setting).
Enable the Masking Zone:
After programming the masking zone, there is no
masking zone on the monitor. To view the
programmed masking zone, the followings:
Move the joystick up or down to position the cursor
beside CH1.
Move the joystick left or right on the parameter to ON.
The programmed masking zone is appeared on the
monitor.
If you want to disable the masking zone, joystick left
or right to OFF.
Delete the masking zone:
To delete the programmed masking zone is with
joystick up or down to position the cursor beside
DELETE ZONE. To set:
Move the joystick left or right the parameter to be
channel number as desire.
After select, press
key on the keyboard.
It is changed to CH1: BLANK.
To save and exit OSD menu, press:
Enter
and press
key on the keyboard.
19. MOTION DETECTION SET
Detect Level: 00 ~ 05 (High number is high sensing)
Detect Position: 01 ~ 08 (Set up to 8 zones)
Set up the parameter of detect position 01 to 08.
It can be moved the sensing cursor to a location as
desire with a joystick.
Set up the sensing level 01 to 05 for each position.
Level 01 is light sensing and up to 05 is high density if
sensing.
After set up, to exit and save the set up with a
pressing .
20. PRIVACY ZONE SET
A privacy masking zone is a pan area, defined by a left and right
limit, on the 360-degree pan plane. The masking zones are
adapted to depth of zoom-in and zoom-out. The Superior Speed
Dome system is capable of eight masking zones.(It allows display
and define two masking zones only in the view of monitor.)
To program the masking zone with the joystick left / right
on the parameter:
First, make zoom-out to limit before programming.
Move the joystick up or down to position the cursor
beside SET ZONE.
Move the joystick left or right. The parameter will be
changed.
Select zone channel number from CH1 up to CH8 as
desire.
When you select zone channel number, press
key on the keyboard.
Detect Level: 01
Detect Position: 01
Press
, set Level
position, save
RTN
Press ESC (F/N), Return Menu
PRIVACY ZONE SET
- CH1 : OFF - CH2 : BLANK
- CH3 : BLANK - CH4 : BLANK
- CH5 : BLANK - CH6 : BLANK
- CH7 : BLANK - CH8 : BLANK
- SET ZONE
: CH01
- DELETE ZONE : CH01
- PREV MENU PAGE
Press ENTER (F/F), SET/DEL
<< CAMERA SETUP p3 >>
17. Select Alarm
: Sensor
18. Motion on/off
: Off
19. Motion Detection Set :
20. PRIVACY ZONE SET :
21. ALARM CH ON/OFF PAGE
22. ALARM PRESET SET PAGE
23. FACTORY RESET WARNING!
- PREV MENU PAGE
<< CAMERA SETUP p3 >>
17. Select Alarm
: Sensor
18. Motion on/off
: Off
19. Motion Detection Set :
20. PRIVACY ZONE SET :
21. ALARM CH ON/OFF PAGE
22. ALARM PRESET SET PAGE
23. FACTORY RESET WARNING!
- PREV MENU PAGE
PRIVACY ZONE SET
- CH1 : BLANK - CH2 : BLANK
- CH3 : BLANK - CH4 : BLANK
- CH5 : BLANK - CH6 : BLANK
- CH7 : BLANK - CH8 : BLANK
- SET ZONE
: CH01
- DELETE ZONE : CH01
- PREV MENU PAGE
Press ENTER (F/F), SET/DEL