l
Replace the DXBUS extension cable (if fitted).
l
Replace the compact remote module.
Note
:
As it is commonplace for attendant control units to be disconnected while the wheelchair is powered up, if a DX2-
ACU is disconnected while the wheelchair is powered up, and the Joystick Source parameter of any of the
programmable profiles has not been set up for an ACU, then no flash code will be displayed.
Furthermore, if the DX2-ACU is disconnected when a system is operating in the ACU profile, then the system will
revert to the last selected profile and no fault will be displayed.
GBK65701 DX2 Compact Remote Modules
Installation Manual Issue 1
Diagnostics - Page 43