Note
:
Set the joystick wake up parameter in Wizard to enable this functionality. The parameter name varies depending
on the remote. For example, for a DX2-REM55x, set
Joystick Wake-up from Sleep
parameter to
Yes
. Or, for a DX-
REMG91S, set the
Enable Joystick Wakeup
parameter to
Yes
.
7.1.8.2 Waking from sleep mode with inactive remote module
If the remote module waking the system was NOT the active remote module before the system went
to sleep, then the system can ONLY be woken by pressing the power button.
7.1.9 Lock mode
When a DX/DX2 system is locked, the DX2-RJM and DX2-RJM-LF user inputs and display are
deactivated. A DX/DX2 system cannot be locked or unlocked with the DX2-RJM or DX2-RJM-LF, but
the locked status can be displayed to the user when the user presses the power button. The
indication is different for DX and DX2 systems.
7.1.9.1 Locked indication in DX systems
To indicate a locked DX system, the mode button will flash (½ second on, ½ second off) when the
power button is pressed.
7.1.9.2 Locked indication in DX2 systems
To indicate a locked DX2 system, the mode button displays inhibit when the power button is pressed.
7.1.10 Configuration mode
The configuration mode is used to set the user display on or off.
The normal operation is for the user display to be on, when the system is powered up, so that the
user can see how the system is working and performing. However, there may be times, such as when
the compact remote is used as a chin control, when the user display is not required. If the display is
set to off, then nothing will be displayed on the display at any time.
The options are:
1.
Display on
(default setting) - all LEDs will display according to their function, when the system is
powered up.
2.
Display off
- all LEDs are switched off at all times.
Note
:
When the display is switched off, the occupant can view wheelchair information with the master remote module.
7.1.10.1 Enter configuration mode
Configuration mode can only be entered with the following button press sequence:
[Note that the system must be powered down to begin.]
1. Press and hold the
mode
button.
2. Press and hold the
power
button until both the mode and power button indicators light up
green.
3. Release the
power
button as soon as the
power
button indicator switches off.
4. Release the
mode
button as soon as the
mode
button indicator switches off.
The battery gauge will light up with the current display setting.
GBK65701 DX2 Compact Remote Modules
Installation Manual Issue 1
Operation - Page 27