GBK65701 DX2 Compact Remote Modules
Installation Manual Issue 1
Note
:
Any accessory modules, such as the DSL-105 Proximity Head Control, or DX-SNP Sip and Puff, that appear as an RJM
in a DX/DX2 system, cannot be used in combination with another RJM-type module.
4.3.2 Compatible master remote modules
The DX2-RJM, DX2-RJM-LF and DX2-ACU compact remote modules will only operate with UCM II
based master remote modules. The following master remote modules are compatible with the DX2-
RJM, DX2-RJM-LF and DX2-ACU compact remote modules.
DX-REM24SD
DX-REM34B
DX-REMG90/A/T
DX-ACU3B
DX-REMG91/S
DX2-REM420/1
DX-REM48/A
(see note below)
DX2-REM550/1
DX2-REMA/B-ACS2 DX-REM41D/E
Warning
:
The compact remotes described in this manual are to be used with selected UCM II based master remote modules
only - see table above. DO NOT use with UCM I based master remote modules.
Note
:
All of the master remote modules listed in the table above, with the exception of DX-REM48/A, are UCM II based.
Depending on its age, the DX-REM48/A may be a UCM I type. If you are using a DX-REM48/A, ensure that it is a
UCM II type before using in a system. If you are unsure, consult your service centre.
Page 12 - Introduction