M
T
Note:
The Wizard needs the DX-GB database update to recognize the DX-
GB. Make sure you have the latest version of the Wizard database
installed. The latest version is available for download on the Dynamic
website: www.dynamiccontrols.com.
Warning:
Always test the vehicle after programming to ensure that the intended
operation is achieved.
3.2
Description of Parameters
Note:
The DX-GB drive algorithm differs from the standard DX system drive
algorithm for 24V DC motors. Some parameters are re-used, but
behave similar, not the same. Other DX system drive parameters are
ignored or replaced by specific DX-GB drive parameters.
The DX system drive parameters that are re-used are listed in section 3.2.1: Modified
System Drive Parameters.
The DX-GB specific drive parameters are listed in section 3.2.2: DX-GB Specific
Parameters.
A full list of DX-GB related parameter names and access restrictions can be found in
section 3.3: DX-GB parameter access list.
The following parameters are those that affect the set-up and configuration of the
DX-GB and are typically set up for a powerchair type, rather than any particular
powerchair user.
Note:
In the case a particular parameter is ignored by the DX-GB, its
parameter description displayed by the Wizard is not applicable.
Section 3.3 lists which parameters are ignored.
The parameter name displayed on the hand held programmer may
be different to that displayed by the Wizard.
21
