7HVWLQJ
33
9.
Go through the DX Remote Check Sequence as described in the DX Remote
Installation Manual.
10.
Go through the Check Sequences as described in the Installation Manuals
of all other DX Modules used in the system.
11.
Turn off the DX System and take the wheelchair off its blocks. Ensure that
the batteries are fully charged before proceeding.
12.
Turn on the DX System and, if the DX Remote allows a choice of drive
programs, select the least lively (normally Drive Program 1).
13.
Sit in the chair and push the joystick slightly out of neutral and listen for the
click of the Park Brakes dis-engaging. Release the joystick to neutral and
listen for the click of the Park Brakes re-engaging.
14.
Drive the wheelchair in all directions slowly and check for precise and
smooth control.
15.
Repeat at higher speeds and on all the other drive programs if available.
16.
Drive the wheelchair on a 1 : 6 ramp and check for normal power,
smoothness and parking.
Warning :
Some of the more lively drive programs may not be suitable for
testing indoors.
Summary of Contents for DX Power Module PMB
Page 5: ...Contents ...