,QVWDOODWLRQ
18
Mixed DXBUS Topology
DX modules normally have one or two DXBUS sockets for system
interconnections. Smaller DX modules may have a permanently mounted cable
terminated in a DXBUS plug, rather than DX sockets.
The star and mixed topologies both require the use of one or more DX Splitter
Boxes. A Splitter Box is a separate panel of four DXBUS sockets that may be
purchased from Dynamic or a Dealer.
The DX Splitter Box Part / Order Number is: DX-SKT-X4.
For lowest cost and simplicity the In-line topology is generally preferred, provided
the DXBUS length and voltage drop requirements described below can be met.
&RQQHFWLRQVWRRWKHU';0RGXOHV
For connection to the DX Remote and other DX Modules, see the individual
Installation Manuals.
Summary of Contents for DX Power Module PMB
Page 5: ...Contents ...