Chapter 3: Installation and Testing
31
3.9
Tiller Connector
The tiller connector provides all the connections necessary to power and control all the
functions contained in the tiller head. This connector also supports the new Multi-function pins
that can be configured for alternative functionality depending on application requirements.
Where the Multi-function pins are listed below, the
bold
text indicates the recommended
default functions.
Tiller Connections
Pin
Function
Wire Gauge
1
Throttle Wiper (TW)
0.5mm²
(20AWG)
2
Throttle Positive (T+)
3
Multi-function Output (
Beeper
)
4
Multi-function Input (
Profile 2
)
5
Key Switch (KS)
6
Multi-function Input (
Slow
)
7
Battery Positive (B+)
1.0mm²
(18AWG)
8
Throttle Negative (T-)
0.5mm²
(20AWG)
9
Speed Limit Pot (SLP)
10
Multi-function Output (
Status Low
)
11
Multi-function Output (
none
)
12
Multi-function Input (
Reverse Drive
)
13
Battery Negative (B-)
1.0mm²
(18AWG)
14
Multi-function Input (
Charger Inhibit
)
0.5mm²
(20AWG)
Mating Connector Part Numbers
Dynamic
Part #
Part Description
Supplier Part #
GCN0887
Molex „Mini-Fit Jr‟ 14-socket housing
39-01-2145
GCN0776
Molex „Mini-Fit Jr‟ Receptacles
16AWG (0.8 – 1.3mm² wire)
39-00-0212
GCN0771
Molex „Mini-Fit Jr‟ Receptacles
18-24AWG (0.2 – 0.8mm² wire)
39-00-0039