The illustrations may differ in some details from the original. Subject to change without prior notice.
Copyright
©
2016,2017 by Dynamic Projection Institute GmbH. All Rights Reserved. http://www.dynamicprojection.com - MDC_QSG - Version 1.0.8- Page 5
Copyright
©
2016,2017 by Dynamic Projection Institute GmbH. All Rights Reserved. http://www.dynamicprojection.com - MDC_QSG - Version 1.0.8 - Page PB
If you replug a projector during operation (this should never happen) the screen layout and output must be
reconfigured also. The recommended way to do so is to reboot the MDC. A reboot can be initiated by:
•
•
Pressing CTRL+ALT+SHIFT+R
•
Click “MDC CONTROL -> MDC CONTROL -> REBOOT MDC” on the MDC Touch
•
Call “shutdown -r now” on the shell prompt
•
Send “MDC_REBOOT” to the mdc-daemon using the MDC PROXY interface (remote)
•
Send “/opt/mdcos/bin/mdc-sender MDC_REBOOT ” to the local system
BEFORE YOU CONTINUE PLEASE NOTICE:
DO NOT:
•
CHANGE THE USERNAME, HOSTNAME OR ANY DIRECTORY NAME ON THE SYSTEM!
•
UPDATE THE SYSTEM UNLESS OUR SUPPORT TELLS YOU SO
•
INSTALL OR REMOVE ANY OTHER SOFTWARE THAN THE ONE THAT IS SHIPPED WITH THE MDC-X
•
SETUP THE SCREEN/DISPLAY WITH ANY OTHER PROGRAMM THAN THE MDC-X TOOLS
•
CHANGE THE ARTNET/LAN NETWORK WITHOUT REASON
•
USE REMOTE DESKTOP CONNECTION ON HIGH LATENCY NETWORKS
You will find more information and tutorials on our YouTube Training channel:
http://www.dynamicprojection.com/training/
