The illustrations may differ in some details from the original. Subject to change without prior notice.
Copyright
©
2016,2017 by Dynamic Projection Institute GmbH. All Rights Reserved. http://www.dynamicprojection.com - MDC_QSG - Version 1.0.8- Page 26
Copyright
©
2016,2017 by Dynamic Projection Institute GmbH. All Rights Reserved. http://www.dynamicprojection.com - MDC_QSG - Version 1.0.8 - Page PB
10. Updating MDC-X and further information
All updates, manuals and further information can be downloaded from our MDC support page:
http://www.dynamicprojection.com/mdc-support/
10.1 Update MDC-X
We recommend updating the MDC-X system only in cases when you need a new feature or told so by our support -
do not update systems that are running fine or during a show setup. Please test your systems, system integrations
and projectes after an update.
Update Installation Instructions:
Download the files - NOTE: DO NOT unzip the files!
Please follow the Installation Instructions:
0) Make sure that no MDC show or program is running.
1) Copy the file MDC-X-update*.zip to your MDC-X system by using a USB stick or network connection (NOTE: DO NOT
unzip the file!)
2) Once the file was copied to the MDC-X (preferable to the Download folder) right click the ZIP file and choose
“Extract Here”.
3) After the file was extracted you will find the file “MDC-X-update-*.run” in the same folder where the ZIP file is.
4) Double click the MDX-X-update-*.run file and follow the on-screen dialog to install the MDC update.
5) When the installation is finished click “OK” on the popup and the system will reboot.
NOTE: The update packages must be installed in the order of release. You will find your current version in MDC-Touch
on the first page after the login in the lower left corner on the page or
10.2 Information and tutorials
You will find more information and tutorials on our YouTube Training channel:
http://www.dynamicprojection.com/training/
