The illustrations may differ in some details from the original. Subject to change without prior notice.
Copyright
©
2016,2017 by Dynamic Projection Institute GmbH. All Rights Reserved. http://www.dynamicprojection.com - MDC_QSG - Version 1.0.8- Page 14
Copyright
©
2016,2017 by Dynamic Projection Institute GmbH. All Rights Reserved. http://www.dynamicprojection.com - MDC_QSG - Version 1.0.8 - Page PB
•
To exit the remote control click on “GOTO MAIN” on the top right of the screen (the little HOUSE icon).
•
On the MAIN screen go to “MDC CONTROL -> JOB CONTROL” and click on “KILL MDC JOB”. This will stop the
running project and kill the MDC process in the background. If you want to turn off the projector you can go
to “MDC CONTROL -> ALL MIRRORS” and click on “GLOBAL Projector LAMP OFF” (Note: this required that the
Projector Mode inside of the Firmware of the Mirror Head is set correctly, the RS232 connection is working and
the Projector accets RS232).
NOTE: Since MDC-Touch is stateless more than one user can connect at the same time controlling different
aspects of the Project like Media, Movement or Presets.
