User’s Manual
42
CRUISE functions. Select one of these modes so that certain action will
be executed when an alarm is triggered. Use the right direction key of the
control keyboard to select a particular action mode, and the items listed
below will change in accordance with your selected alarm action.
•
PRESET POINT
Select a preset point where the dome should go when an alarm pin is
triggered. The preset point(s) should be set prior either in the PRESET
setup menu or through the keyboard.
SEQUENCE LINE
Select a sequence line that the dome camera should execute when an
alarm pin is triggered. The sequence line(s) should be defined prior either
in the SEQUENCE setup menu or through the keyboard.
AUTOPAN LINE
Select an auto-pan line that the dome camera should execute when an
alarm pin is triggered. The auto-pan line(s) should be defined prior either
in the AUTOPAN setup menu or through the keyboard.
CRUISE LINE
Select a cruise line that the dome camera should execute when an alarm
pin is triggered. The cruise line should be defined prior either in the
CRUISE setup menu or through the keyboard.
•
DWELL TIME
The DWELL TIME is duration of executing an alarm action. If select the
PRESET mode, when alarm takes place, the dome will go to the selected
preset position and stay there for a user-defined period of time
(1~127seconds/Always). If select other modes (SEQUENCE/AUTOPAN/
CRUISE), the dome will keep executing the selected mode (DWELL TIME:
ALWAYS) until alarm condition is released or users rotate the dome.
NOTE:
The dwell time is only adjustable when selecting
Preset
as
the alarm action.
•
EXIT
Exit the
ALARM SETTING
menu.
3.3.19 ALARM DETECT (E/F/U Model Only)
When the alarm detect function is activated, the camera will detect movement
within a monitoring area and then send an alarm signal automatically. Before
