User’s Manual
25
NOTE:
If this function is enabled, the WDR function (for K model only)
will be disabled automatically. For details, refer to section 3.3.20 WDR
Setting.
3.3.4 FOCUS
The focus of the dome camera can be operated in two modes: Auto Focus
mode and Manual Focus mode. Various setting for different models are
described as follows.
E/F/U Model:
•
AUTO
The optimum focus is achieved by the internal digital circuit. There are 3
modes for users to select for different conditions.
Normal AF (Auto Focus) Mode:
The dome will automatically adjust the
focus of the picture.
Zoom Trigger Mode:
When users press the TELE or the
WIDE buttons on a
control keyboard or other control devices to change the zoom, the dome will
automatically adjust its focus after a period of time (the initial preset value is
five
seconds) until the commands of TELE/WIDE is terminated.
Interval AF Mode:
The mode is used for AF movements carried out at
particular intervals. If users pan/tilt the dome, the dome will focus
automatically after a period of time; the initial value is five seconds.
•
MANUAL
In this focus mode, users can adjust the focus speed, ranging from 01 ~ 08.
R/K Model:
•
AUTO
The optimum focus is achieved by the internal digital circuit. Users can adjust
the minimum auto focus range for some special conditions; the options are
<1 cm>, <10 cm>, <30 cm> and <1 m>.
FOCUS SPEED
01
TURNING VALUE
10CM
