User’s Manual
32
comparing with that under the M.E. mode.
NOTE:
The Privacy Mask function will be automatically disabled if
the Image Flip function is enabled, and the screen will show “MASK
WILL BE SET OFF.”
M.E. (Mechanical Flip)
M.E. is a standard mechanical operation. As the dome tilts 90°, it will pan
180°, and then continue tilting to keep tracking objects.
OFF
Select this item to disable the flip function.
NOTE:
To
adjust the dome’s tilt angle between -10° to +100° or -10
°
~ +190
°
, please go to
ANGLE ADJUSTER
(see next section) to
complete setting. Otherwise, the dome will only be able to tilt 90°.
•
ANGLE ADJUSTER
The item is for adjusting the angle of view. The Range of the view angle
varies in different FLIP modes: the angle ranges from -10
°
to +100
°
in the
M.E. FLIP and FLIP OFF modes, and from -10
°
~ +190
°
in the IMAGE FLIP
mode.
•
SPEED BY ZOOM
If the item is set to <ON>, the pan/tilt speed will be adjusted automatically in
proportion to the zoom ratio by internal algorithm. The larger zoom ratio
leads to the lower rotating speed.
•
AUTO CALI. (Auto Calibration)
There are one horizontal point and one vertical infrared rays check point in
each dome. During installation or maintenance, the dome camera’s position
may be moved. Therefore, the relative distance between the original set
point and the check point will be changed. If enable the Auto Calibration
function, the dome will automatically detect the matter and reset the
horizontal point back to the original position.
ANGLE ADJUSTER
ADJUST MIN ANGLE
-10DEG
ADJUST MAX ANGLE
100DEG
EXIT + SAVE
YES
