User’s Manual
36
•
RUN
SEQUENCE
Users can command the dome camera to run the selected sequence line
manually.
•
EXIT
Select the item to exit the
SEQUENCE
menu.
Users could execute the sequence function through a keyboard.
Please refer to the dome camera’s quick guide for further information.
3.3.14 AUTOPAN
Auto-pan means motion of scanning an area horizontally so that the dome
camera can catch horizontal view. The parameters are listed as follows.
•
AUTOPAN LINE
There are four sets of auto-pan line built in a dome camera. Users can
choose a line to execute using LEFT/RIGHT direction keys. In addition,
users are able to command the dome camera to do endless panning by
setting the start point the same as the end point.
•
START
POINT
Follow the description below to set the start position of the AUTOPAN path.
1. Move the cursor to <START POINT> and press <ENTER> while the
item, <TO FIND>, is flashing. Then the item will turn <TO SAVE>
automatically.
2. Move the dome to a desired position and press <ENTER> to save the
position as the start point; the cursor will move to <END POINT>
automatically. Ensure setting the end point to complete auto-pan
setting.
NOTE:
The tilt and zoom values of the start point will be recorded
and fixed for the selected auto-pan line.
AUTOPAN
AUTOPAN
LINE
1
START POINT
TO FIND
END POINT
TO FIND
DIRECTION RIGHT
SPEED
01
RUN
AUTOPAN
ENTER
EXIT
YES
