User’s Manual
12
2.5
Dome Control Protocol
Protocol is a specific set of rules, procedures used for data communications.
Basing on the devices of your surveillance system and define the protocol you
are going to use. Generally, use one protocol even the devices are provided
from different manufacturers. Use the switch to set your dome control protocol
and the baud rate. Refer to below table and turn the arrow to choose a protocol
for your speed dome.
Switch No.
Protocol
Baud Rate
00
VCL 9600
01
Pelco D
2400
02
Pelco P
4800
04
Chiper 9600
05
Philips 9600
07
DSCP 9600
08
AD422 4800
09
DM P
9600
11
Pelco D
4800
12
Pelco D
9600
13
Pelco P
2400
14
Pelco P
9600
15
JVC 9600
Select protocol: Pelco D, with switch no. 01 and baud rate 2400, for instance,
the protocol switch should be set as below.
Decimal Digit Single Digit
2.6 22-Pin
Connector
Definition
A 50-cm data cable (shown as the figure below) is shipped with the integrated
high speed dome for quick installation for demo or testing usage. Additionaly,
the section will also provide the definition of each pin within the 22-pin
