dynabook Satellite C50-K, Manual

Page: 37 / 46

Installing the Panel Assembly
Install the panel assembly according to the following procedures:
1. Place the panel assembly upside down so that the bottom is facing up.
2. Connect the eDP cable to the panel connector and lock it with lock bar, then adhere the mylar
over the connector to secure it in place as shown in Figure4- 23
□
,7
□
,
8
3. Connect the eDP cable FFC to the camera FPC board connector as shown inFigure4- 22.
□
,6
□
,5
□
,4
□
,3
4. Pull up the blue release paper of Panel Adesive from LCD coveras show in Figure4- 25.
□
,2
5. Rotate the panel right-side up and use 0.5mm Mylar between LCD cover and Panel to seat it in
the correct position as shown in Figure4- 25
□
,1