dynabook Satellite C50-K, Manual

Page: 28 / 46

Figure4- 16 Location of Electronic tape & Conductive tape
Installing the Touch Pad Module
Install the touch pad module according to the following procedures:
1. Seat the touch pad in the correct position on the logic upper assembly
□
,5.
2. Seat the TP support bracket in the correct position on the logic upper assembly
□
,4 and
tighten two M2×3 screws to secure the tp support bracket to the logic upper assembly
□
,3.
3. Connect the touch pad FPC to the touch pad
□
,1
□
,2.
4. Adhere the conductive tape over the touch pad and logic upper assembly as shown
in Figure4- 16
□
,6.