dynabook Satellite C50-K, Manual

Page: 25 / 46

4.10 Finger Print Module
Removing the Finger Print Module
Remove the finger print assembly according to the following procedures and Figure4- 14
1. Disconnect the finger print FFC from finger print module
□
,1
□
,2.
2. Remove the one M2×2 screw securing the finger print bracket to the logic upper
assembly
□
,3.
3. Remove finger print bracket
□
,4 from the logic upper.
4. Gently push the finger print away from the logic upper assembly
□
,5
.
Figure4- 14 Removing the Touch Pad Module