17
Dymax BlueWave® LED Flood System User Guide
Selecting the PLC Mode from the Timer or Manual Mode:
1.
Press the PLC Access Switch on the back of the unit (Figure 12).
2.
From the main page, press the
button to open the Options Menu (Figure 13) within 30 seconds.
Figure 12. PLC Access Switch
Figure 13. Options Menu
3.
Use the
and
buttons, so that the “SELECT MODE” option is flashing and press the
button
to open the Select Mode Menu (Figure 14).
4.
Using the
and
buttons, highlight “PLC
MODE” and press
the button.
NOTE:
If you do
not see “PLC Mode”, then select “CANCEL” using the
and
buttons and press
the button. Then follow the instructions starting at step 1.
5.
PLC Mode selection is successful if the screen below appears.
Figure 14. Select Mode Menu
Figure 15. PLC Mode Menu
