Quasar CP Series HD PTZ Camera User and Installation Guide
75
Send HTTP notification
Check this box to send a notification by HTTP. Select the destination HTTP address from the drop-
down menu and specify the parameters for event notifications by Motion Detection triggered. When
an alarm is triggered, the notification will be sent to one of two specified HTTP servers.
Record Stream to SD Card -
Select this box to store the motion detection recording in a
MicroSD/SDHC card when motion is detected. Enter the number of seconds for the pre-trigger buffer.
Select the first radial button if you wish to upload for a specified length of time and enter the number
of seconds. Alternatively, select the second radial button to upload during the active trigger.
NOTE:
Make sure that local recording (with a MicroSD/SDHC card) is activated so that this function can be
implemented. See
Recording
for further details.
File Name
The uploaded image’s filename format is set in this section. Select one that meets your requirements.
Save
Click the
Save
button to save your Motion Detection settings.
