Quasar CP Series HD PTZ Camera User and Installation Guide
102
Preset
From the
Preset
page, users can program up to 256 Preset Points
to target a specific view in the Live View Pane.
To program a Preset Point:
1.
Move the cursor to the Live View Pane.
Left-click and drag the red pointer to the desired position
Adjust the fine zoom/focus ratio.
Under
Preset setting
, assign an unused number to the Preset Point from the drop-down Number List. Click the
PrePage
or
NextPage
buttons for additional numbers.
Enter a descriptive name for the Preset Point.
Click
Set
to save settings.
To move the camera to a Preset position:
1.
Under
Preset go
, select the desired Preset Point from the drop-down Preset list.
Use the
PrePage
or
NextPage
buttons located under
Preset setting
for additional numbers.
The camera moves to the target position.
