Quasar CP Series HD PTZ Camera User and Installation Guide
16
Tighten the screw at the side of the camera’s fixing plate to secure it to the T-Bar Bottom Mount.
Loosen the wings from the In-Ceiling (T-Bar) Bracket by turning each wing’s center screw counterclockwise (as
indicated in the first figure below), until the wings are able to swing outward (as shown in the second
figure below).
Place the ceiling sticker on the ceiling plate, and cut the circle part out of the ceiling.
With the wings facing inward, place the winged T-Bar Bracket into the ceiling opening.
Insert a hand into the center of the T-Bar Bracket and rotate the wings to face outward. Tighten the three
screws clockwise until the wings are completely flush with the ceiling board.
Thread cables through the center hole of the T-Bar and connect them to the camera.
