Quasar CP Series HD PTZ Camera User and Installation Guide
70
PTZ Function -
Assign a camera function (Preset, Sequence, Auto pan, or Pattern), and specify a
Preset Point/Sequence Line/Auto pan Path/Pattern Line to be performed when the alarm is triggered.
NOTE:
See
PTZ Settings
for details of Preset Point/Pattern Line/Auto pan Path/Sequence Line setups.
If the selected function is
Preset
, a value (1 ~ 256 sec.) must be entered in the in the
Dwell time
field. When the
alarm is triggered, the camera will move to the selected Preset Point and remain in that position for the defined
dwell time. For function modes other than
Preset
, the camera will continue to execute the specified function
until the camera’s alarm status is reset.
NOTE:
The Dwell Time is only adjustable when selecting
Preset
as the alarm action. After the dwell time
has elapsed, the camera will return to its trigger position and recheck alarm pin status.
