Quasar CP Series HD PTZ Camera User and Installation Guide
56
Click
Save
to save the settings.
Advanced
Web server port -
The default web server port is 80. Once the port is changed, the user must be
notified the change for the connection to be successful. For instance, when the Administrator
changes the HTTP port of the camera whose IP address is 192.168.0.100 from 80 to 8080, the user
must type in the web browser “http://192.168.0.100:8080” instead of “http://192.168.0.100”.
RTSP port -
The default setting of the RTSP Port is 554. The range is from 1024 to 65535.
MJPEG over HTTP port -
The default setting of MJPEG over HTTP Port is 8008. The range is from 1024
to 65535. Note that MJPEG is not supported by Latitude.
HTTPS port -
The default setting of HTTPS Port is 443. The range is from 1024 to 65535.
MTU -
The MTU (Maximum Transmission Unit) is the greatest amount of data that can be transferred
in one physical frame on the network. For Ethernet, the MTU is 1500 bytes. For PPPoE, the MTU is
1492.
NOTE:
Be sure to assign a different port number for each separate service mentioned above.
Click
Save
to save the settings.
IPv6 Address Configuration
With IPv6 support, users can use the corresponding IPv6 address for browsing. Enable IPv6 by checking the box.
Click
Save
to save the setting.
