30
/
84
SM-SG-2 Ev3/25062014
-
Install both springs by using pliers and secure them by two self-securing nuts M6
-
Connect hydraulic hose
-
Deaerate system by breather, see above
-
Adjust braking function by the fork rod, see above
b) Replacement of the brake lining
Dismounting:
-
Remove driving belts on the brake side, see
6.15 Replacement of the driving belts
-
Undo both lock nuts of the hydraulic motor
-
Pull out brake strap Fig. 2
-
Undo fork, Fig. 17, from both springs to release brake lining on the pulley Fig. 24
-
Undo split pin FIg 6. together with the washer and pull out the brake lever with the lining
-
Remove two split pins of the lining, Fig. 22, and change the lining for a new one
Summary of Contents for ILD02 SG
