27
/
84
SM-SG-2 Ev3/25062014
-
Mount the belts to the hydromotor pulley.
-
By means of tightening bolt M8x55 tight belts XPB1450LW and secure the hydromotor by two nuts M10
(Torque – 45 Nm)
Fig. 48
-
Mount the house 1SC06x0,7 to the throat XAL 12-1 / 14-1,5 of the brake cylinder (Torque – 45Nm)
Fig. 49
-
Release the brake lever and securing pin
Fig. 50
-
Fill up hydraulic oil (Fig. 12, 13)
-
Lift the mower. The wheel must be of f the ground
Fig. 51
Summary of Contents for ILD02 SG
