Manual BAC25A
M-B025CN-300-EN
27
6.4 Error message "Overheat"
This message is displayed when the BAC25A internal operating temperature rises too high. The
charging process will be stopped and the alarm activated. In this case, it is necessary to wait for
the test set to cool down and repeat the charging process.
Figure 6-4: Error message "Overheat"
6.5 Error message "Malfunction"
If this message is shown on the display, or if BAC25A cannot operate anymore at all, a serious
internal error occurred. Please do not open BAC25A without permission and instructions given by
IBEKO Power AB. Please refer to
”Manufacturer Contact Information” section for contact
information.
Figure 6-5: Error message "Malfunction"
6.6 Error message "Mains Voltage < 90V"
This message is displayed when the BAC25A mains voltage is below 90 V. The BAC25A must be
restarted to reset the status message.
Figure 6-6: Error message "Mains Voltage < 90V"
