Manual BAC25A
M-B025CN-300-EN
21
Figure 3-24: The
Limits
menu
The alarm settings can be reset by pressing the
SET
button during the charging. The ALARM
menu is displayed (Figure 3-25).
Figure 3-25: The
Alarm
menu
Changes are confirmed by pressing
ENTER
and the display switches back to the
Charging
screen.
If
Overvoltage
or
Undervoltage
value is reached, the buzzer is on and the appropriate message is
displayed (Figure 3-26). The charging is not interrupted in case alarm messages are displayed.
Figure 3-26: The
alarm messages
The charging can be terminated in several ways:
-
If a preselected limit is reached (
STOP U, STOP I
or
STOP T
),
-
If the user presses the
STOP
button.
If a
STOP U, STOP I
or
STOP T
limit is reached and the charging is stopped, the corresponding
message is displayed while the buzzer is on (Figure 3-27). In case the user manually stop the test
by pressing the STOP button, the message
Charging stopped
is displayed and the buzzer is on. In
both cases, the user should press the STOP button to turn off the buzzer while the display will
switch to the main
UU
screen (Figure 3-6).
