Dürkopp Adler D669, Operating Instructions Manual

Page: 59 / 226

Programming
Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020 57
5.4.1 Authorizations as
Default Technician
The factory setting for the
Default Technician
requires
that the technician enter their username and password
(
technician, 25483
) to log in. If selecting User Management
as a
Default Technician
(

p. 54 ), you will be presented
with the following interface:
Fig. 37: Authorizations as
Default Technician
On the left-hand side, you can select between the tabs (1) reserved
for roles (

p. 58 ) and users (

p. 62 ). Detailed explanations
are provided further below. To the right of the tabs you will find
the list (2) of created roles / users - varying with the tab (1) you
selected. On the far right, you will find the settings (3) associated
with the role/user you selected.
Explanation of role and user
(1) - Tab for roles and users
(2) - List of roles/users (3) - Settings for
roles/users
Role User
A role defines which authorizations
are permitted or forbidden.
It is possible to assign more than
one role to a single user.
You need to be a user to log in;
you cannot log in using a role. You can log in as a user.
A user can be assigned one or
several roles - this is how they
receive their authorizations.
①
② ③