Dürkopp Adler D669, Operating Instructions Manual

Page: 182 / 226

Troubleshooting
180 Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
2172 Error Stepper motor card X30
motor overload / overvoltage
/overcurrent (Stitch length) • Check selection of class
• Replace control
• Replace encoder
• Replace stepper motor
2173 Error Stepper motor card X30
Sewing motor encoder not
connected (Stitch length) • Replace control
2174 Error Stepper motor card X30
Sewing motor encoder not
init (Stitch length) • Perform a software update
• Check selection of class
2175 Error Stepper motor card X30 Init
Position not found (Stitch
length) • Check for stiff movement
• Replace encoder
• Replace motor
2176 Error Stepper motor card X30 not
Enabled (Stitch length) • Replace control
2177 Error Stepper motor card X30
Overload (Stitch length) • Check for stiff movement
• Replace encoder
• Replace motor
2178 Error Stepper motor card X30
Encoder failure (Stitch
length) • Replace encoder
2179 Error Stepper motor card X30
Current sensor failure (Stitch
length) • Replace control
2180 Error Stepper motor card X30
Incorrect stepping motor
direction of rotation (Stitch
length) • Replace encoder
• Check if plugs have been mixed up
• Check the wiring in the machine
distributor and change it if necessary
2181 Error Stepper motor card X30
Reference drive failure
(Stitch length) • Check for stiff movement
• Replace encoder
• Replace motor
2183 Error Stepper motor card X30
overcurrent (Stitch length) • Replace control
Code Type Possible cause Remedial action