Dürkopp Adler D669, Operating Instructions Manual

Page: 110 / 226

Programming
108 Operating Instructions D669 M-TYPE DELTA - 00.0 - 10/2020
Software /
Stitch Counter
In Software mode,
the bobbin is
monitored by
the software based
on the number of
stitches sewn.
Counter Type
4 different counters can be
applied. The following 3 sub-
items can be set for each of
the counters.
Value range
A/B/C/D
Counter value
Bobbin supply capacity in
stitches. This is a very variable
value, which depends on
the size of the bobbin and
the thickness of the thread.
Value range
00000 - 99999
Sewing stop
Sewing stops and a notice is
shown on the display when
the bobbin is detected to be
nearly empty. If the parameter
is not activated, only the
LEDs on the machine arm
give a warning if the bobbin
is empty.
Value range
On/Off
Sewing foot lower
position
Value range
On/Off
Reset necessary
It is only possible to resume
sewing after changing
the bobbin and confirming
the message on the control
panel.
Value range
On/Off
Menu item Setting 1 Setting 2